How to maintain the glass curtain wall

Glass curtain wall maintenance should pay attention to:

An important part of the curtain wall is glass, which is a consumable part, so management and protection are important.

Management and protection under construction conditions

Wide circulation of air in the place where it is preserved is necessary. Especially in the high temperature and cycle temperature cycle should pay more attention. If conditions do not allow them to be stored indoors, they should be covered with tarpaulin or plastic to prevent wind and inflow of water, and the hood should be opened regularly to check for moisture condensation.

The glass must be covered with an opaque shield that must never be stored directly under the sun. Stacking all types of glass should be placed upright at an angle of 5 ° - 7 ° from the vertical and leaning against a solid straight wall. The top and bottom edges of all glass should be on the felt pad and separated by protective cardboard or other felt. If the glass is flat, the surface must be covered with oil felt to prevent dust, grit, or other contaminants.

Protection during construction. In the construction, it is usually hung with a bright flag, ribbon, etc. near the glass or attached to the front of the window frame, side column or window sill to mark the space for installing the glass. Never let the rope touch the glass directly, and do not let the mark or paint directly on the glass surface. If welding, cutting sandblasting or other construction techniques that may damage the glass are used near the glass, plywood or plastic must be applied. The plates act as a tight barrier to prevent them from affecting the glass.